Name: KYDZ Smart Key Programmer for Android

 

Description:

 

KYDZ Smart Key Programmer work on Android. It supports Remote Test Frequency, Refresh Generate Chip Recognition, Smart Card Generate.

 

Functions:

 

1. Chip Identification, Copy and Generation

2. Anti-theft Data Write Key

3. Remote Generation

4. Support Frequency Detection, Infrared Detection

5. NXP Renew

6. Smart Card Generation

 

Power On and Off:

 

1. Power on: press the battery button in 3 to 5 seconds, entering the Android screen, then click the “agree”.

 

2. Power off: press the battery button in 2 to 3 seconds, appearing the word “power off”, then click the “power off”.

 

Home Menu Description:

 

1. Active message showing: show the new message of KYDZ

2. Remote Make: producing the RKE remote key.

3. Frequency: detecting the frequency and infrared.

4. NXP Renew: OEM and after market is supported.

5. Chip Identify: recognize the chip, edit, read the EEPROM.

6. Copy: (still research and develop).

7. Special Function: (still research and develop).

8. Smart Card: producing all kinds of PKE remote keys.

9. Make Chip: G make, G mass, ID67, ID68, ID70, ID70E, ID33, ID40, ID4, ID42, ID43, ID44, ID45, ID46, ID60, ID61, ID62, ID63 and so on.

10. Settings: WiFi setting, display setting, volume setting, language setting, PC mode.

 

Operation Instructions:

 

1. Remote Make

Please check if the battery of the RKE remote key can work before making, then clicking the “remote make”-----choose the area----choose the type of car----enter the screen of remote make----put the RKE remote key into the Key slot----appear the word “connect the remote key”----click generate---remote making-----read successful----confirm.

 

2. Frequency

(1) Detecting Frequency: click “frequency”-----put the remote key near this machine----press the button of the remote key----appearing relative information of the key.

 

(2) Detecting Infrared: click “frequency”-----put the remote key near this machine----press the button of the remote key----appearing information.

 

3. NXP Renew

Click “NXP renew"----choose the area----choose the type of the car-----enter the screen and connect the circuit-----use the PS2 wire to connect the port of the PS2--------click “refresh/update”-------reading the chip------read successful----click “confirm”

 

4. Chip Identity 

(1) Click “chip identity”-----put the chip into the Key slot----click chip identify-----recognizing----finished----showing the information of chip---click “chip edit”

(2) Click “chip identity”-----out the chip into the key slot------click “EEPROM”----click “read the data of EEPROM”

 

5. Copy: (still research and develop).

 

6. Special Function: (still research and develop).

 

7. Smart Card

Please check if the battery of the RKE remote key can work before making, then clicking the “remote make”-----choose the area----choose the type of car----enter the screen of remote make---read PKE remote key---adjust it until it display the “PKE remote key”----click “generate”--confirm

 

8. Make Chip

(1) Car model: put the chip into the key slot----click “make chip”----car model----choose the area----choose the type of the car----click “Importing files”---confirm----back to the last interface---click “generate”--confirm

 

(2) Image generator: put the chip into the key slot----click “make chip”---click “image generator”---choose G producing as your need.

 

(3) Unlock: put the chip into the key slot-----click “make chip”-----click “unlock”----choose the area----the the type of the car--- detecting the battery---detecting the data of the factory----reset the chip.

 

9. Settings

(1) WIFI setting: click “setting”---click “WiFi setting”----choose the internet------connect

 

(2) Display setting: click “setting”---click “display setting”----adjust the light of the screen as you want

 

(3) Volume setting: click “setting”---click “volume setting”----adjust the volume of the screen as you want

 

(4) Language setting: click “setting”---English / Chinese

 

(5) PC mode: connect to the computer

 

(6) About: showing the version of this machine 

 

Specifications:

 

Size: 5.0 inch

Battery: 5000mAh / 3.7V

Charging: DC 5V / 1A

Using Environment: -10 to 55 degree centigrade